wideband load insensitive mixer rev. v2 SM5T ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? lo 50 to 5000 mhz ? rf 50 to 5000 mhz ? if 50 to 3000 mhz ? lo drive +10 dbm (nominal) ? insensitive to system load mismatch ? high intercept: +18 dbm (typ.) description the SM5T is a termination insens itive mixer, designed for use in military, wireless and test equipment applications. the design utilizes schottky bridge quad diodes , broadband ferrite baluns and internal loads to provide excellent per formance without degradation due to external vswr mismatches. environmental screening available to mil-std-883, mil-std-202 or mil-dtl-28837, consult factory. ordering information part number package SM5T surface mount electrical specifications: z 0 = 50 lo = +10 dbm (downconverter application only) parameter test conditions units typical guaranteed +25oc -40o to +85oc ssb conversion loss (max) & ssb noise figure (max) fr = 0.05 to 1.5 ghz, fl = 0.05 to 1.5 ghz, fi = 0.05 to 1.5 ghz fr = 1.5 to 3.0 ghz, fl = 1.5 to 3.0 ghz, fi = 0.05 to 3.0 ghz fr = 3.0 to 5.0 ghz, fl = 3.0 to 5.0 ghz, fi = 0.05 to 3.0 ghz db db db 6.9 7.5 8.5 8.3 8.8 10.5 9.0 9.5 11.2 isolation, l to r (min) fl = 0.05 to 1.0 ghz fl = 1.0 to 5.0 ghz db db 35 33 25 23 23 21 isolation, l to i (min) fl = 0.05 to 1.0 ghz fl = 1.0 to 5.0 ghz db db 40 35 32 25 30 23 isolation, r to i (min) fr = 0.05 to 5.0 ghz db 32 1 db conversion comp. fl = +10 dbm dbm +7 input ip3 fl = 0.05 to 5.0 ghz, fr = 0.05 to 5.0 ghz, fi = 0.05 to 3.0 ghz dbm +18 vswr r-port fr = 0.05 to 5.0 ghz, l-port fl = 0.05 to 5.0 ghz, i-port fi =0.05 to 3.0 ghz 1.8:1 1.6:1 1.4:1 product image
wideband load insensitive mixer rev. v2 SM5T ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. absolute maximum ratings parameter absolute maximum operating temperature -54oc to +100oc storage temperature -65oc to +100oc peak input power +20 dbm max @ +25oc +17 dbm max @ +100oc peak input current 50 ma dc outline drawing: surface mount * ? dimensions are inches (millimeters) 0. 015 (0.38) unless otherwise specified. weight: 2 grams (0.07 oz.) max.
|